Product Introduction
KTF2 slider type electronic ruler (also known as resistance ruler, potentiometer, displacement sensor) principle: The principle of potentiometer, all sensors are position measurement type, used to adjust the system (control system) and measurement system, directly measure displacement and length, output DC voltage signals, and can also be converted into standard 0-5V, 0-10V, or 4-20mA DC signals through built-in or external V/A transmission modules, and can also transmit control requirements over long distances. KTF1 slider electronic ruler (also known as resistance ruler, potentiometer, displacement sensor) output displacement change: 0- given input working voltage (varies with displacement).
Technical Parameters
KTF2 Linear Transducer | 75~110mm | 125~175mm | 200~550mm | 600~1000mm | 1150~2000mm | 2000mm↑ | Stroke Length |
Linear Precision (±%FS) | ±0.1% | ±0.05% | ±0.04% | ||||
Resistance (±10%) | 5ΚΩ | 10ΚΩ | 20ΚΩ | ||||
Effective Stroke | range+3mm | ||||||
Resolution | Infinite | ||||||
Repeatability Precision | 0.01mm | ||||||
Max Speed | 10m/S | ||||||
Recommended Current | ≤10uA | ||||||
Max Power Supply | 36V | ||||||
Temperature Coefficient | normal 5 ppm/K | ||||||
insulating Strength | ≥10MΩ | ||||||
Insulating Strength | ≤100uA | ||||||
Case Dimension(A) | rang e+56mm | ||||||
Effective Stroke | rang e+8mm | ||||||
Max Bearing Pull | 50KG | ||||||
Working Stress | horizontaldiraction＜10N | ||||||
vertical direction≤10N | |||||||
Vibration Resistance Level | 5...2000HZ, A max=0.8mm, a max=20g | ||||||
Shock Resistance Standard | 50g, 11ms | ||||||
Temperature Range | -60℃~+150℃ | ||||||
Ingress Protection | IP67(DIN40500/IEC529) | ||||||
Sensitivity | 1 | ||||||
Temperature Drift | infinitesimal | ||||||
Very long life | >100*1000000 cycles,>25*1000000 m | ||||||
Install Dimension:
Model description: KTF2:Hersman plug type, KTF2C:waterproof connector type, KTF2P:Aviation plug type
Features: The horizontal direction of the connecting rod above the slider can be installed at any Angle of 360
degrees, and the installation Angle of the upper and lower direction is also flexible,which solves the problem
of limited installation Angle of the old KTF.
Signl output:
Resistance output type (potentiometer): 5k Ω, 10K Ω, 20K Ω,
Voltage output type (external/internal module): 0-5V, 0-10V,
Current output type (external/internal module): 4-20MA (two wire, three wire),
Digital signal (external/internal module): RS485,
Applications:
The KTF2 slider displacement sensor is a miniaturized universal installation that is particularly suitable for reducing the installation size in the direction of mechanical length. It is suitable for applications with larger stroke sizes, such as large injection molding machine closing stroke, rubber machine closing stroke, woodworking machinery, and hydraulic machinery