Product Introduction:
KSN self resetting displacement sensor (also known as resistance ruler, electronic ruler, potentiometer, displacement sensor) principle: potentiometer principle, all sensors are position measurement type, used to adjust the system (control system) and measurement system, directly measure displacement and length, output DC voltage signal, or convert the signal into standard 0-5V, 0-10V, or 4-20mA DC signal through built-in or external V/A transmission module, It is also possible to transmit control requirements over long distances. KSN self resetting displacement sensor (also known as resistance ruler, electronic ruler, potentiometer, displacement sensor) output displacement change: 0- given input working voltage (changes with displacement).
Technical Parameters:
| Standard Specifications: | brand:Miran | |||
| KSN minitype | 10mm | 15mm | 25mm | Stroke Length （mm） 10mm 15mm 25mm |
| Linear Precision (±%FS) | ±0.25% | |||
| Resistance (±10%) | 2KΩ | |||
| Effective Stroke | range+3mm | |||
| Resolution | Infinite | |||
| Repeatability Precision | 0.01mm | |||
| Temperature Coefficient | ≤1.5ppm/℃ | |||
| Recommended Current | ≤1mA | |||
| Input Voltage | (4ΚΩ~5ΚΩ): ≤24VDC;(2ΚΩ~3ΚΩ)≤12VDC；（1KΩ）≤5VDC | |||
| Output | 0~ × input voltage | |||
| Sensitivity | 1 | |||
| Temperature Drift | infinitesimal | |||
| Load Characteristic | ≥10mA | |||
| Very long life | >100*1000000 cycles,>25*1000000 m | |||
Digital signal (external module) : RS485,
Product Dimension:
