
The probe is fixed on the bearing shell/housing, with its face directed toward the rotating journal:
Static state: The journal rests at the bottom of the bearing shell, and the probe reads the initial gap.
Rotor rotation: The hydrodynamic oil film lifts the journal, causing eccentricity and vibration within the bearing shell.
Monitoring Applications for Sleeve Bearings
Shaft centerline position and oil film thickness monitoring
Shaft relative vibration (shaft vibration)
Identification of oil whirl, oil whip, bearing wear, and rub-impact faults
Protection interlock for large rotating machinery (trip on excessive vibration)
Monitoring Advantages: Non-contact and wear-free; capable of measuring both static position and dynamic vibration simultaneously; immune to lubricating oil, oil contamination, and dust; high resolution (up to 0.1 μm).
By installing two probes perpendicular (90°) to each other at the same bearing location, displacement in both the X and Y directions can be obtained. This allows for plotting the shaft centerline orbit, visually revealing the motion of the shaft within the bearing shell. It is a standard monitoring method for sleeve bearings in steam turbine sets and large pumps.

Application Scope
By measuring the relative position between a metallic target and the probe tip, eddy current displacement sensors induce and process signals accordingly. These sensors are widely used for long-term, real-time monitoring of parameters such as shaft displacement, shaft vibration, and rotational speed in large rotating machinery.
Characterized by long-term reliability, high sensitivity, strong anti-interference capability, non-contact measurement, and fast response, they are immune to media such as oil and water. Furthermore, their applications have expanded into fields such as satellite launches, material identification, weighing measurement, metal sheet thickness measurement, and material deformation analysis.