TEL:

180 3818 6775

Announcement:
Your current location :Home>>浙江News>>Industry News

浙江Installation Case of Miran MLZX Vibrating Wire Crack Meter in Building Monitoring

Release Date:2026-11-17 Click:8

米朗MLZX振弦式裂缝计在房屋监测.png

I. Role in Building Crack Monitoring

1.Real-time crack risk monitoring to replace subjective visual inspection: Visual inspection can only identify surface cracking and cannot determine whether a crack is still developing. As the crack opens or closes, the crack meter drives changes in the tension of the internal steel wire, converting deformation into readable displacement data. It records real-time crack width, deformation rate, and cumulative deformation, thereby distinguishing harmless cracks limited to surface plaster from active hazardous cracks caused by foundation settlement or wall structural damage.

2.Long-term online monitoring for hazard early warning: When paired with a data acquisition unit and an IoT module, the system performs 24/7 automatic data collection. Once the crack expansion rate or total opening exceeds the safety threshold, an alarm is triggered to detect structural deterioration in advance and help prevent safety incidents in aging buildings.

3.Temperature compensation to eliminate false deformation interference: Exterior walls are subject to large day-night temperature differences and rain exposure, and thermal expansion and contraction of the wall can produce false deformation. This vibrating wire crack meter features built-in temperature measurement and uses temperature compensation to remove thermally induced expansion and contraction, obtaining true structural deformation and avoiding false alarms or misjudgment.

4.Data support for structural assessment and reinforcement: Continuous time-series monitoring data can serve as objective evidence for dangerous building assessment and safety screening of old residential communities. After reinforcement is completed, continuous monitoring can verify whether the cracks have stabilized and help evaluate the effectiveness of the reinforcement measures.

5.Establishing long-term structural records: It is suitable for routine monitoring of aging buildings, preserving traceable structural safety records.


II. Key Advantages of the Miran Crack Meter for This Application

1.Strong anti-interference performance, suitable for complex exterior wall environments: The sensor outputs a frequency signal and is less susceptible to electromagnetic interference caused by cable moisture, long-distance wiring, air conditioners, and power lines. Compared with voltage-type sensors, it is more suitable for exterior walls with dense pipeline and wiring layouts.

2.Long-term stability with reduced high-altitude maintenance: The sensor features low zero drift and good repeatability, supporting continuous long-term monitoring. It does not require frequent on-site calibration, helping to avoid repeated high-altitude work on exterior walls.

3.Installation-friendly with minimal damage to old walls: It adopts surface-mounted installation, requiring only fixation of anchor bases on both sides, without large-area wall chiseling that would damage the original plaster. The bracket-type installation accommodates diagonal cracks as shown in the figure, reducing measurement errors caused by installation eccentricity. The IP67 stainless-steel waterproof housing can withstand rain and water seepage on exterior walls.

4.High sensitivity for early hazard detection: It can identify millimeter-level micro-displacements and capture deformation when cracks begin to expand slightly and are difficult to detect visually, enabling early warning.

5.Remote unattended operation: After being connected to the data acquisition system, monitoring data can be uploaded remotely without the need for manual on-site readings, making it suitable for long-term monitoring of large batches of old residential buildings.